The (blue) Wi-Fi lamp on the printer will continue flashing while searching for, or connecting to the access point. Make sure that this button starts to flash blue and then go to your access point and press the button within 2 minutes.įor exact details regarding pressing the WPS button, please refer to the access point manual. Press and hold the button on the front of the printer for a few seconds.ġ. Make sure that the printer is turned on.Ģ. Most WPS enabled access points use this protocol.ġ. Your network must be using the WPA (Wi-Fi Protected Access) or WPA2 security protocol. If the WPS push button is not available please use the instructions in the Standard Connection Method section. Please check with your device’s user guide for details. The access point must have a physical WPS push button available. Before we start, there are some conditions that must be met in order to use the WPS push button method:
